Колёсная опора промышленная поворотная 125 мм (SC 55)--> 100--> Краскопульт пневматический SATAjet 100 B F HVLP 1.7

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

объем бачка 0.6 л;способ распыления: HVLP;регулировка подачи материала;максимальный диаметр сопла 1.7 мм


Обзор:

Краскопульт из Китая:Sata jet 4000 RP

Save time and material at the shop with the Satajet 100 BF HVLP Primer Gun. The Satajet 100 series perfect for primer materials application.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

The primer works well for spot repairs on larger surfaces, as it has an inlet pressure that ranges from 15-29 psi.

ссылка /> View and Download SATA Jet operating instructions manual online.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

SATAjet K3 Paint Sprayer pdf manual download. Also for: Satajet rp.

SATA SATAJET 3000 K RP/HVLP OPERATING INSTRUCTIONS MANUAL Pdf Download.


The "Super Saver" SATAjet 4000 B HVLP HVLP = High Volume Low Pressure - spray pressure technology.Terminology for an internationally recognized low-pressure whereby the transfer efficiency rate has to 65%, while the maximum air cap pressure is below 0.7 bar.
Sata 5000 RP vs.

SATA - Preparation of underground with the SATAjet 100 B spray gun series (EN)

Sata 5000 HVLP paint gun. HVLP is a general industry terms and stands for ‘High Volume Low Pressure’ (at least 65% transfer.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

‘RP’ is a SATA acronym for ‘Reduced Pressure’. Spray guns with ‘RP’ technology belong to the of ‘compliant” guns.
View and Download SATA SATAJET 3000 K RP/HVLP operating instructions manual.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

SATAJET 3000 K RP/HVLP Paint Sprayer pdf manual download.
Will fit SATAjet RP & HVLP Spray Guns with twist & lock style ONLY !

Minijet 4400 B ONLY (will not fit minijets ), SATAjet 4000 B, SATAjet 3000 B, SATAjet 2000, SATAjet NR 2000, SATAjet RP, SATAjet B, LM 2000 B, 100 B, SATASATAjet 90.

SATAjet® 1000 B HVLP / csgoup.ru


So my would be base / Sata 4000 digital 1.3 clear / Iwata LV400 1.4 Sealer/ Sata 100 b primer(if you can afford get one for primer(1.7, 1.8tip) and one sealer(1.4) spot in Sata Посетить страницу they might have a new model coming out since the 4000's came out) and if you have to shoot single a cheap $100 Devibiss.


Test pistoletu Speedway HVLP 1.7 oraz opinia na temat tego pistoletu.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

Liczę również na Wasze opinie komentarzach. Dokładana nazwa pistoletu: SPEEDWAY HVLP 2014 nr.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

1282 dysza 1.7 Video.
The SATAjet 4000 B HVLP is setting the standards. Featuring state-of-the-art technology, the spray gun has been optimised with the passion for precision so typical of as well undergoing intensive practical tests.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

/> SATAjet 100 B F Gravity Primer Spray Gun. Highest economic efficiency SATA’s HVLP technology guarantees transfer efficiency rates significantly above the required 65% by VOC legislation.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

This spray gun for filler and primer is not only environmentally friendly, but it also saves a lot of material. Would RP be better??
Thanks in advance Mike you will not be able to hold the cups upside down you could use Devilbiss Dekups for that or a 3M PPS cup I have the older versions of what you have listed ,3000rp ,100rp the tip sizes will be determinded by what material you spray through itso read the tech sheets to get a starting point as the manufacture will give a tip size recommendation base gun is the 3000 HVLP uses less material than the RP I have a 1.
I'm supprised you are coming out of school and are planning on shooting solvent I would guess that they are still doing it where you are from but it will end eventually.
Anyway I've been doing this about 10yrs now which makes me feel older just saying it and I've been a dealership painter for more then half.
Not saying that all dealership painters are better then independant but we are held to a higher standard everyday.
Anyway I just converted to Iwata LV 400 1.
Sata wants you to shoot at 29psi inlet pressure Iwata want half of that so you stir less when you are spraying.
If I was smarter when I first started out I would have done some more research other then just ask the painters my own shop.
I was shooting for my first перейти на страницу with a shitty 3m compliant until a jobber let me try a Sata.
Buy good guns and things will come easier to you, I know some of you guys and I have one at work saying it's not the gun but you never be as good as you can be with shitty tools that break.
If you have more questions about anything just send me a нажмите чтобы перейти at jwilliams240 aol.
Not saying that all dealership painters are better then independant but we are held to a higher standard everyday.
Anyway I just converted to Iwata LV 400 1.
Sata wants you to at 29psi inlet pressure Iwata Ремень DIESEL half of that so you stir when you are spraying Could you explain the higher standard.
I dont understand :?
I shoot a sata nr2000 for base and a 3000rp for and dont have any issue with it stirring up debris or anything else.
It's all in how you prep the job.
If you really want to get a nice base and nice clear gun then go for it.
You can definitely get away without the minijet for awhile and a cheap primer gun will get you by well Thanks for the replies.
Actually I put the in on Friday for: Sata 4000 Dig HVLP 1.

Краскопульт пневматический SATAjet 100 B F HVLP 1.7

Комментарии 10

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *